Model-specific repair
Honda CR-V Dual Mass Flywheel Replacement in Vantaa
Honda CR-V dual mass flywheel replacement is planned from the engine and equipment data. Before work begins, we use the VIN to confirm the generation, engine and the parts or fluids that affect the job.
Typical repair costs for Honda CR-V
- Dual Mass Flywheel Replacement - from 490 €
- Diagnosis and work scoping
- fluid, clutch or bearing matched to the transmission code
- Installation and required checks
- Final inspection and road test where applicable
Model-specific repair
Dual Mass Flywheel Replacement
The Finnish benchmark includes labour and parts; exact applicability, parts and price are confirmed by VIN.
from490 €
CR-V: service scope
Dual Mass Flywheel Replacement concerns the clutch and transmission. Replacing the dual mass flywheel. Eliminates gearbox vibration and rattling. A dual-mass flywheel (DMF) damps engine vibration before it reaches the gearbox. The internal springs and glide elements wear over time and eventually the flywheel starts to clunk at idle and shake with the clutch released. The fault can also be identified from metallic clicks during acceleration or deceleration. Replacement is usually due around 150 000–250 000 km, or earlier if the car has towed heavily or the clutch has been used hard.… The clutch transfers engine power to the gearbox and enables take-off and gear changes. The clutch package includes disc, pressure plate, release bearing and often dual-mass flywheel.… Across Honda CR-V First- through sixth-generation CR-V models, including European petrol, diesel, hybrid and plug-in hybrid versions. Finnish and European generations, parts and procedure can vary by engine, transmission, body style and equipment. Before a repair decision, we check transmission type, fluid specification, clutch and fault memory. The measured result defines the work scope, and the customer approves parts, price and any additional work before installation.
Model-specific repair
Model-specific notes
Honda CR-V dual mass flywheel replacement starts with identifying the correct variant and confirming the symptom.
- Inspection is commonly needed when shifting jerks, slips, makes noise or engages late.
- Before replacing a component, we distinguish mechanical wear, leakage, electrical control faults and incorrect adjustment.
- Parts and procedures can differ across CR-V First- through sixth-generation CR-V models, including European petrol, diesel, hybrid and plug-in hybrid versions. Finnish and European generations by engine, transmission, body style and equipment grade.
- Inspection covers transmission type, fluid specification, clutch and fault memory.
- If delayed, incorrect fluid or delayed repair can damage the transmission.
- Finnish freezing weather, road salt, short trips and incomplete service history are considered during diagnosis.
Maintenance and inspection patterns
- Book a visit if shifting jerks, slips, makes noise or engages late.
- Request a quote when you want the CR-V-specific parts, price and labour time confirmed before repair.
- Bring the car for diagnosis if a warning remains on or the same symptom returns after fault-code clearing.
- Include the registration number, mileage, symptom timeline and earlier repairs in the booking.
- Arrange an inspection before a roadworthiness test or long trip if operation has changed.
- Follow the CR-V variant's maintenance schedule and respond to changed noise, feel, leakage or warnings.
- After the work, operation is checked as appropriate for the service and the findings are documented for the customer.
- The next inspection interval depends on generation, mileage, operating conditions and the condition found during repair.
Frequently asked questions
Does dual mass flywheel replacement suit every Honda CR-V?
The service can be carried out on applicable CR-V variants, but the component, fluid and procedure depend on generation, engine and equipment.
Is the VIN required?
Yes. The VIN separates engine, transmission, body style and factory equipment before quoting.
What determines the Honda CR-V dual mass flywheel replacement price?
The price depends on diagnosis, variant-correct parts or fluids, work scope and any additional damage. The final quote is approved before work begins.
How long does the work take?
Labour time is confirmed from the registration or VIN, symptom description, parts availability and the scope found during inspection.
Can the work be combined with scheduled maintenance?
Often yes. Mention other service needs when booking so parts, work order and completion time can be planned together.
Other services
Related model-specific services
Technically adjacent repairs and maintenance for the same vehicle system.
Honda CR-V Front Brake Pads
from 150 €
Honda CR-V front brake pads is planned from the engine and equipment data. Before work begins, we use the VIN to confirm the generation, engine and the parts or fluids that affect the job.
Honda CR-V Rear Brake Pads
from 150 €
Honda CR-V rear brake pads is planned from the engine and equipment data. Before work begins, we use the VIN to confirm the generation, engine and the parts or fluids that affect the job.
Honda CR-V Brake Discs and Pads Front
from 375 €
Honda CR-V brake discs and pads front is planned from the engine and equipment data. Before work begins, we use the VIN to confirm the generation, engine and the parts or fluids that affect the job.
Honda CR-V Brake Discs and Pads Rear
from 375 €
Honda CR-V brake discs and pads rear is planned from the engine and equipment data. Before work begins, we use the VIN to confirm the generation, engine and the parts or fluids that affect the job.
Honda CR-V Brake Fluid Change
from 60 €
Honda CR-V brake fluid change is planned from the engine and equipment data. Before work begins, we use the VIN to confirm the generation, engine and the parts or fluids that affect the job.
Honda CR-V Timing Belt Replacement
from 600 €
Honda CR-V timing belt replacement is planned from the engine and equipment data. Before work begins, we use the VIN to confirm the generation, engine and the parts or fluids that affect the job.
Honda CR-V Shock Absorber Replacement
from 405 €
Honda CR-V shock absorber replacement is planned from the engine and equipment data. Before work begins, we use the VIN to confirm the generation, engine and the parts or fluids that affect the job.
Honda CR-V Wheel Bearing Replacement
from 225 €
Honda CR-V wheel bearing replacement is planned from the engine and equipment data. Before work begins, we use the VIN to confirm the generation, engine and the parts or fluids that affect the job.
Model-specific repair
Honda CR-V Dual Mass Flywheel Replacement in Vantaa
The Finnish benchmark includes labour and parts; exact applicability, parts and price are confirmed by VIN.
Popular Services